Fan-made, build-your-own BlueWhite Kid Hat Caddy or....

[RioDog]

..What I did on my holiday break.

Follow these easy steps to build your own BlueWhite Kid Hat Caddy.

1) Find a foam head, a work shop and a few handy tools.

 

[RioDog]

2) Adjust neck length to fit your vehicle's rear window deck (a little gruesome, but you'll just have to suck it up).

 

[RioDog]

3) The height is now correct and the head has been mounted to a base for stability. Now mask off one half of the head. If you struggle with scissor/tape activities, recruit the nearest grade-schooler to help you. On second thought, they probably are more accustomed to "virtual" art than the real thing, so I guess you're on your own.

 

[RioDog]

Be sure to use a commercial spray booth so as not to inhale toxic paint fumes.

 

[RioDog]

4) Apply paint evenly, making light, quick passes until the desired hue is reached.

 

[RioDog]

Make sure the paint is even front to back. This is your handiwork for cryin' out load: take

 

[RioDog]

5) Carefully remove the masking and... Voila! Your BlueWhite Kid Hat Caddy is complete!

 

[RioDog]

Tomorrow I'll post about adding a UConn cap and mounting your Hat Caddy in your vehicle... stay tuned!